Data Integrity Checks:
======================
Info   : Table data should preferably be continuously increasing,
         even when it is independent of the output load. Such non increasing
         table data was found in all the cells of the library
Info   : Load_Limit is more than maximum load axis value in following cell(s)
         AND2X1
         AND2X2
         AOI21X1
         AOI22X1
         BUFX2
         BUFX4
         DFFNEGX1
         DFFPOSX1
         FAX1
         HAX1
         INVX1
         INVX2
         INVX4
         INVX8
         MUX2X1
         NAND2X1
         NOR2X1
         NOR3X1
         OAI21X1
         OR2X1
         OR2X2
         PADINOUT
         PADOUT
         TBUFX1
         TBUFX2
         XNOR2X1
         XOR2X1
Warning: Fanout Limit is missing/zero for all the output/inout pins in the
         library
Info   : Unspecified/zero output pin capacitances for the following cases
         (<cell>-><pin>)
         AND2X1->Y
         AND2X2->Y
         AOI21X1->Y
         AOI22X1->Y
         BUFX2->Y
         BUFX4->Y
         CLKBUF1->Y
         CLKBUF2->Y
         CLKBUF3->Y
         DFFNEGX1->Q
         DFFPOSX1->Q
         DFFSR->Q
         FAX1->YC
         FAX1->YS
         HAX1->YC
         HAX1->YS
         INVX1->Y
         INVX2->Y
         INVX4->Y
         INVX8->Y
         LATCH->Q
         MUX2X1->Y
         NAND2X1->Y
         NAND3X1->Y
         NOR2X1->Y
         NOR3X1->Y
         OAI21X1->Y
         OAI22X1->Y
         OR2X1->Y
         OR2X2->Y
         PADINC->DI
         PADINOUT->DI
         PADOUT->YPAD
         XNOR2X1->Y
         XOR2X1->Y
Warning: All Buffers in the library have output slew ratio greater than
         max value of 0.5
Info   : Wireload models are not present in the library
Info   : Signal integrity checks not present in the library
Warning: Slew_limit for input pins is not defined for one or more cells in the
         library
Warning: Slew_limit for output pins is not defined for one or more cells in the
         library
Warning: Slew_limit for bidirectional pins is not defined for one or more
         cells in the library
Info   : ROUTING_LAYER construct is not defined in the library
Info   : MIN_POROSITY construct is not defined in the library
Warning: MPWL arc not defined for the following cases (<cell>-><pin>)
         LATCH->CLK
Info   : SetUp/Hold Data is negative for all sequential cells in the
         library
Tool specific Checks:
=====================
Signal integrity Analysis tools specific checks:

Warning: Signal integrity construct(s):
             CT_TOLERANCE
             CT_RES_LOW
             CT_RES_HIGH
             VDROP_LIMIT
         is(are) not present in the library. This will affect quality of
         results of the Signal Integrity Analysis tools
--------------------------------------------------------------------------------

Power Analysis tools specific checks:

Warning: Negative Data values found in Energy data table for the 
         following cell(s)
         FAX1
--------------------------------------------------------------------------------

Synthesis tools specific checks:

Warning: Synthesis construct(s)
             pad_type
             is_clock_gating_cell
             clock_gating_integrated_cell
             complimentary_pin
             fault_model
         is(are) not present in the library. This will affect the quality of
         results of Synthesis tools
--------------------------------------------------------------------------------

DFT tools specific checks:

Warning: DFT construct(s)
             dont_fault
             TEST_FUNCTION
             x_function
             test_output_only
         is(are) not present in the library. This will affect the quality
         of result of test synthesis tools
--------------------------------------------------------------------------------